Foundations of Fuzzy Control, Wiley, 2013

332 صفحه

مبانی کنترل فازی

Foundations of Fuzzy Control, Wiley, 2013

Passive Control of Steel Structures Utilizing Cylindrical Friction Dampers

نویسند‌گان: [ h Mirzaeefard ] - M.Sc. Graduate, Department of Civil Engineering, K.N. Toosi University of Technology, Tehran, Iran,[ h.r samani ] - Instructor, Department of Civil Engineering, Islamic Azad University – Pardis Branch, Tehran, Iran[ m mirtaheri ] - Associate Professor, Department of Civil Engineering, K.N. Toosi University of Technology, Tehran, Iran

خلاصه مقاله:

In this investigation, seismic response of steel structures utilizing Cylindrical Frictional Dampers (CFD) is studied. CFD is an innovative frictional damper which comprises two principal elements, the shaft and the hollow cylinder. These two elements are assembled such that one is shrink-fitted inside the other. If the damper’s axial force overcomes the static friction load, the shaft inside the cylinder will move and results in considerable mechanical energy absorption. To assess the efficacy of CFD, various steel frames are constructed and analyzed using OpenSees software. Nonlinear time history analyses and Incremental Dynamic Analysis (IDA) are applied to the frames and clear distinction has been drawn between the frames comprising CFD and the counterparts without CFD to emphasize the effectiveness of CFD in altering seismic responses. The results show that CFD extremely improves the seismic response of the structure

کلمات کلیدی:Passive control, Cylindrical Frictional Damper, Incremental Dynamic Analysis, Seismic response

خوردگی و روشهای کنترل آن CORROSION AND CORROSION CONTROL -wiley 2008

CORROSION AND CORROSION CONTROL (An Introduction to Corrosion Science and Engineering) wiley 2008

این کتاب از انتشارات wiley بوده و در مورد انواع خوردگی و روشهای کنترل آن صحبت می کند.

CONTROL VALVE HANDBOOK fisher

Control valves are an increasingly vital component of modern manufacturing around
the world. Properly selected and maintained control valves increase efficiency, safety,
profitability, and ecology.
The Control Valve Handbook has been a primary reference since its first printing in
1965. This fourth edition presents vital information on control valve performance and
the latest technologies.
Chapter 1 offers an introduction to control valves including definitions for
common control valve and instrumentation terminology.
Chapter 2 develops the vital topic of control valve performance.
Chapter 3 covers valve and actuator types.
Chapter 4 describes digital valve controllers, analog positioners, boosters,
and other control valve accessories.
Chapter 5 is a comprehensive guide to selecting the best control valve for
an application.
Chapter 6 covers the selection and use of special control valves.
Chapter 7 covers desuperheaters, steam conditioning valves, and turbine
bypass systems.
Chapter 8 offers typical control valve installation and maintenance procedures.
Chapter 9 includes information on control valve standards and approval
agencies throughout the world.
Chapter 10 offers useful tables of engineering reference data.
Chapter 11 includes piping reference data.
Chapter 12 is a handy resource for common conversions.
The Control Valve Handbook is both a textbook and a reference on the strongest link
in the control loop: the control valve and its accessories. This book includes extensive
and proven knowledge from leading experts in the process control field including
contributions from the ISA and the Crane Company.

BP Process Safety Series Control of Work A collection of booklets describing hazards and how to manage them,

91 صفحه pdf

BP Process Safety Series Control of Work

A collection of booklets describing hazards and how to manage them, 

سرفصلها:

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Control of Work Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Control of Work process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Written procedures for Control of Work . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Roles and accountability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3 Training and competency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.4 Planning the work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.5 Risk assessment of work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.6 Permit to work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.7 Documentation, communication and approval . . . . . . . . . . . . . . . . . 57
2.8 Work monitoring and management . . . . . . . . . . . . . . . . . . . . . . . . . . 60
2.9 Safe conditions on completion/interruption of work . . . . . . . . . . . . . 63
2.10 Auditing the Control of Work process . . . . . . . . . . . . . . . . . . . . . . . . 66
2.11 Lessons learned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.12 Obligation and authority to stop unsafe work . . . . . . . . . . . . . . . . . . 74
3. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4. Some points to remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Test yourself! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86